Evo-Blockseal – 5L or 20L

EVO-BLOCKSEAL – Penetrating up to 100mm, inorganic transparent water based impregnate. Outperforming all silane and standard acrylic solutions. Negative pressure to 4 Bar (60 psi).

EVO-BLOCKSEAL EARTH FRIENDLY WATERPROOFING SYSTEM BASED ON ADVANCED ACRYLIC POLYESTER POLYMER TECHNOLOGY

Non toxic, non-caustic, non-flammable, polyester polymer formulation.
Waterproofs, insulates, hardens and preserves concrete blocks permanently.
Causes a chemical reaction that solidifies the component parts of pre-cast block, masonry, concrete and cement mortars into a single mass making it waterproof, resistant to acid, oil, fuels, fats and grease. Will stop dusting, cracking, seepage as it increases the density of the substrate, increases wear capability.

• All old or new concrete blocks, masonry used in Block wall construction.

• Suitable over weak and old substrates.
• 50 to100mm masonry penetrating saturant.
• Prevents saponification of paints, does not contain oils or solvents.
• Prevents efflorescence.
• Safe for users and adjacent areas, it does not require special protection equipments.
• Non-corrosive, non-toxic and non-flammable.
• Environmentally friendly. Saves hazardous classified materials transportation cost.
• Problem free bond for paint.
• Can be rendered or painted.
• Will not harm glass, tiles or aluminium.
• Permanently waterproofs and preserves, Concrete Blocks, Cement Bricks and Sandstone.
• Dries clear with a slight sheen

See below for Technical Data Sheet and/or SDS Sheet

Download TDS

Download SDS