VOTED #1 Waterproofing Supplier in Australia 

Ardex WPM 150 1m x10m Roll

Ardex WPM 150 1m x10m Roll

In stock

or 4 fortnightly payments of $41.58 with Afterpay More info

Ardex WPM 150

Ardex WPM 150 is a Torch Applied A.P.P. (Atactic Polypropylene) Plastomeric type modified bitumen membrane, consisting of a specially formulated bituminous compound of distilled asphalt modified with selected high grade visco-elastic polymers and reinforced with a polyester reinforcement. WPM 150 is coated with either a sanded or talc top surface finish, while the bottom surface is embossed and protected by a heat sensitive polythene film. This type of finish for the lower surface has been chosen for two specific purposes:

1. To act as a temperature gauge during application. When the film melts it shows that the compound is at the correct temperature.

2. The embossing is to allow the gases to rapidly escape when heated to its correct installation temperature avoiding possible problems of bubbling and blistering.

For great service, helpful advice and all product inquiries please call our friendly staff on 1300 758 448.

  • Sandwich membrane
  • Retaining walls
  • Balconies
  • Terraces
  • Roofs
  • Single or multi-layer tanking membrane
  • Excellent cold flexibility to -5 º C
  • Will not decay
  • High puncture resistance
  • Excellent elongation
  • High mechanical characteristics

NOTE: Must be protected from UV

Ardex WPM 150 1m x10m Roll - Ardex WPM 150

Click on below links for Technical Data Sheets and/or SDS Sheets 

ardex-wpm-150-data-sheet

Download TDS

Download SDS